3com Series 760 Manual De Usuario
3-14
C
HAPTER
3: T
ROUBLESHOOTING
3 Select 3Com Megahertz 10/100 LAN CardBus PC Card
and click Properties.
4 Change I/O or IRQ value and click Confirm.
Changing the I/O, IRQ, or Memory Range
If you discover resource conflicts, you can change the I/O
Base Address, Interrupt Request (IRQ), or Memory Range
using Windows 95.
Base Address, Interrupt Request (IRQ), or Memory Range
using Windows 95.
1 Double-click the System icon in the Control Panel.
2 In the System Properties window, click Network
Adapters.
3 Double-click 3Com Megahertz 10/100 LAN CardBus
PC Card Manual Load.
4 Select the Resources tab.
5 Select Input/Output Range, Interrupt Request, or
Memory Range.
In Windows 95 OSR2, the memory range value should be
the same as the CardBus socket.
the same as the CardBus socket.
6 Click the Change Settings button.
7 Change the value and click OK.
8 Restart the notebook to change the values.
Disabling PC Card (PCMCIA) Support for Windows 95
If you have a problem using two PC Cards at the same
time, follow these instructions to disable PC Card
support. You cannot use another PC Card while PCMCIA
Support is disabled.
time, follow these instructions to disable PC Card
support. You cannot use another PC Card while PCMCIA
Support is disabled.
1 Double-click the System icon in the Control Panel.
The System Properties window appears.
2 Click the Device Manager tab.
3 Click Property and place a check mark next to
Disable the Device.
If PCMCIA socket is not listed, PC Card support is already
disabled.
disabled.