3com WL-305 Manual De Usuario

C

HAPTER

 2: I

NSTALLING

 

THE

 W

IRELESS

 C

LIENT

with a CD-ROM drive and a floppy drive and eight or more diskettes. Make sure 
you have enough diskettes on hand.

1 For the driver software, prepare a diskette labeled Drivers.

For the rest of the software, label diskettes numerically (Disk 1, Disk 2, Disk 3...).

2 Put the 3Com CD in the CD-ROM drive. The setup program should start 

automatically. If it does not start, you can run it manually by selecting Run from 
the Start menu and specifying the srsetup.exe program (for example, 
d:\srsetup.exe).

3 In the 3Com 11 Mbps Wireless LAN menu, click Tools and Utilities.

4 In the Tools and Utilities menu, click Create Installation Diskettes.

5 In the Disk Factory window, click Next.

6 Select the software you want to transfer to diskette. The Disk Factory displays the 

number of diskettes that will be required. Make sure you have that number of 
diskettes.

7 Select the action (for example, Create and Verify Disks), specify the destination 

location, and click Next.

Follow the prompts on the screen.

If you are installing the drivers manually, use the Drivers diskette when the setup 
wizard for your operating system prompts for drivers supplied by the 
manufacturer.

When you are ready to install the application software from diskette, put 
3Com 11 Mbps Wireless LAN Application Disk 1 in the floppy drive and run the 
setup.exe program.

1 Turn on the computer.

2 Insert the 3Com PC Card into the PC Card slot until it seats snugly.

Arrows on the front of the card indicate the insertion point to the slot. Align the 
card properly before inserting it in the slot.