3com 3C990B-TX-M Manual De Usuario

2      Installing and Connecting the NIC

20

To connect the Remote Wake-Up cable:

1 Make sure that the NIC is properly installed in a PCI slot.

2 Insert the Remote Wake-Up cable into the RWU connector on the NIC as shown in 

the next figure.

Twist the cable twice before attaching the cable to the PC.

3 Attach the other end of the cable to the connector on the PC motherboard.

Refer to your PC documentation if you need help locating the connector.

4 Replace the PC cover and plug in the power cord.

Do not turn on the power to the PC. Continue at step 3 in “Installing and Connecting 
the NIC” on page 18.

See the following topics for requirements and instructions on installing software for 
various operating systems:

■

■

■

The next step is to install the network driver.

Go to “Installing NIC Drivers and Diagnostics For Windows” on page 21 or “Installing 
NetWare Drivers” on page 55.

For a list of additional network drivers that are not included on the EtherCD (for example, 
SCO UnixWare 7, SCO OpenServer 5, Linux 2.2, Solaris) and instructions on how to install 
them, go to the 3Com Web site and search for “3C990B” and “drivers.”