3com 3C990B-TX-M Manual De Usuario

6      Installing NetWare Drivers

62

3 NetWare lists the valid slot number(s) for the NIC, depending on how many NICs are 

installed. The values appearing in the list are the slot values that you should use.

Example:

After you issue the command, a message appears. At the end of the message, 
additional text similar to the following appears:

Total of 2 3C99x PCI adapter card(s) found. Supported slot 

values are 2,3.

Slot:2

Two drivers are associated with 3Com Advanced Server technology features under 
NetWare: SE and LBRSL.

1 From the Configuration Options screen select Product options.

2 Select Install a product not listed.

The following message appears:

Product will be installed from A:\. If you are installing 

from floppy, insert the first diskette of the product you 

want to install into the drive and verify that the path above 

is correct.

       Press <F3> to specify a different path;

       Press <ENTER> to continue.

3 Press F3.

4 Enter this command:

The following message appears:

Product “3Com DynamicAccess Server Features” was found. 

Verify that this is the product you want to install before 

proceeding.

       Press <ENTER> to continue.

       Press <ESC> to abort installation.

5 Press Enter.

The system copies the 3Com Advanced Server software to the SYS volume.

1 Press Esc to return to the Installation Options screen.

2 From the Configuration Options screen, select NCF files options (create/edit server 

3 Select Edit AUTOEXEC.NCF file.

4 Make the following changes to the AUTOEXEC.NCF file:

a Add a command to load the SE and LBRSL drivers before any commands to load 

LAN drivers. For example: