Siemens 2000592-001 Manual De Usuario

Continued

 

 

This command sets the device IP address. Each device in the system 
must have a unique IP address. Your TCP/IP network administrator can 
help you choose appropriate addresses for your network. IP addresses 
are entered in “dotted-decimal” notation. For example: 

The IP address is not automatically stored in non-volatile memory until 
the reset command is entered. You can display the current IP address 
with the config display command. 

 

This command displays the configuration parameters for the device. 

 

This command sets the IP subnet mask for the device. Your TCP/IP 
network administrator can help you choose appropriate subnet mask for 
your network. Subnet masks are entered in “dotted-decimal” notation. 
For example: 

The subnet mask is not automatically stored in non-volatile memory until 
the reset command is entered. You can display the current subnet mask 
with the config display command. 

 

This command sets the address of the IP router to which the device 
should send TCP/IP messages whose destinations do not reside on the 
devices’ own network. Your TCP/IP network administrator can help you 
choose appropriate router addresses for your DataNET hubs (a router 
address is not required). Addresses are entered in “dotted-decimal” 
notation. For example: 

 

•  37