Schneider Electric 66846 Manual De Usuario
Network
Management Card
User Manual
Network Management Card
– User Manual
34003676EN/HA
Page
69/81
6.2 Configuration via Telnet
You can access the configuration menu (see “
configuration in local mode
” section) from a station equipped with
the Telnet protocol.
As soon as the card is accessible on the network, enter the command:
telnet < card IP address > to access the menu.
The password defined by default is MGEUPS.
The card will disconnect automatically after 3 minutes of inactivity.
As soon as the card is accessible on the network, enter the command:
telnet < card IP address > to access the menu.
The password defined by default is MGEUPS.
The card will disconnect automatically after 3 minutes of inactivity.
6.3 Configuration via SSH
You can access the configuration menu (see “
configuration in local mode
” section) from a station equipped with
the SSH protocol when https option is selected.
when user connect to NMC by SSH, the screen will hold about 10 seconds for process encryption cipher.
Note : SSH connection is allowed, when SSL Activation is checked in the Access Control Page.
In this case, the telnet connection will be not available.
when user connect to NMC by SSH, the screen will hold about 10 seconds for process encryption cipher.
Note : SSH connection is allowed, when SSL Activation is checked in the Access Control Page.
In this case, the telnet connection will be not available.
6.3.1 PuTTY SSH Client Program
PuTTY is a free implementation of Telnet and SSH for Win32 and Unix platforms,
along with an xterm terminal emulator. You can get the PuTTY by
along with an xterm terminal emulator. You can get the PuTTY by
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Here after, we will show you how to set up PuTTY programme for connecting to NMC
card by SSH V1 protocol.
card by SSH V1 protocol.