Siemens 11 Manual De Usuario

Gigaset USB Adapter 11 / en / A31008-E105-B102-1-7619 / appendix.fm / 06.12.2002

This section contains instructions for configuring the TCP/IP protocol of the Gigaset USB 

Adapter 11. The IP address policy depends on your wireless network. 

1. On the taskbar, select Start - Settings - Control Panel, double-click the Network 

icon.

2. Click the Configuration tab of the Network dialog box.
3. In the network components list, select the TCP/IP protocol of your Gigaset USB 

Adapter 11, e.g., Wireless LAN Card, and then click Properties. 

4. On the IP Address tab, choose one of the methods as required. 

Option A: Click Specify an IP address.
In the IP Address box, enter a valid four-component IP address, either a public or pri-

vate one as required. If a private IP address is used, the following three blocks of IP 

addresses are available for private networks: 
10.0.0.0 – 10.255.255.255, 172.16.0.0 – 172.31.255.255, 192.168.0.0 – 

192.168.255.255

i

For Windows 98, 98 SE and ME you may need the CD containing your 

operating system. The operating system data will be required if no net-

work functions have previously been installed on your PC.