Toshiba P000233790 Manual De Usuario
2
Macintosh OS X Configuration
Ethernet Settings
The following screen shots give an example of how to configure the network settings for a Macintosh
OS X computer.
Ethernet Settings
The following screen shots give an example of how to configure the network settings for a Macintosh
OS X computer.
Step 1: At the Macintosh desktop, select the
Apple icon at the top left of the screen, click
on “System Preferences”, then select and
click on the “Network” icon at the top of the
panel.
Apple icon at the top left of the screen, click
on “System Preferences”, then select and
click on the “Network” icon at the top of the
panel.
Step 2: In the Network panel, Select “Active
Network Ports” in the Show choice box to
verify your networking interfaces (Built-in
Ethernet, Add-on Ethernet, or AirPort)
are active.
Step 3: Then select the Ethernet port you
are using to connect your Macintosh to the
PCX5000 in the Show choice box. The
default port is “Built–in Ethernet”. Click on
the TCP/IP tab and select “Using DHCP” in
the Configure choice box.
are using to connect your Macintosh to the
PCX5000 in the Show choice box. The
default port is “Built–in Ethernet”. Click on
the TCP/IP tab and select “Using DHCP” in
the Configure choice box.
Step 4: Click the “Apply Now” button at the
bottom right corner of the menu.
Step 5: You should now be able to access
the PCX5000 configuration pages. Launch
the browser supplied with the Macintosh and
open location:
”
http://192.168.100.1
”
Proceed now to the “Configuring the
PCX5000 Gateway” section of this manual.
PCX5000 Gateway” section of this manual.