Toshiba DEV002Z Manual De Usuario

E6581295⑥ 

- 10 - 

4. Connecting to the network 

 

(1) Attach DeviceNet cable to DeviceNet connector. (Refer to Section 2.1).   

(Be careful not to short-circuit adjacent terminals on DeviceNet connector). 
 
<Recommended cable> 

Thin branch cables: DeviceNet-specific thin cable. 

<Tightening torque> 

0.5 - 0.6 N·m 
Recommended screwdriver: Small flat-blade screwdriver (blade thickness: 0.6mm, 
blade length: 3.5mm or less)   

(2) Please set the terminating resistance if needed. 

<Terminating resistance specification> 

1/4 W - 121 ohm, 1% Metal Film 

(3) Using the DIP switch on the DeviceNet 

option

, set a MAC ID number and a baud rate. 

(Refer to Section 4.3).   

(4) Once all the parameters are set, the power must be cycled to the VF-AS1/PS1 for 

these changes to take effect. (Refer to Section 5.)