Toshiba ETB003Z Manual De Usuario

Descargar
Página de 16
 
E6581339⑥ 
■ 
Wiring
 
  Caution
 
 
Mandatory 
▼ 
Electrical construction work must be done by a qualified expert.   
Installation or connection of input power by someone who does not have that expert 
knowledge may result in fire or electric shock. 
▼ 
Shut off power when installing and wiring this option.   
Wait at least 15 minutes and check to make sure that the charge lamp (VF-AS1/PS1)   
is no longer lit.   
▼ 
Tighten the screws on the terminal block to the specified torque (Refer to Section 2.2). 
If the screws are not tightened to the specified torque, it may lead to fire.   
 
■ 
Operations 
 
  Warning
 
 
Prohibited 
▼ 
Do not pull on any cable itself.   
Doing so could result in damage or malfunction. 
▼ 
Do not touch switches when the hands are wet and do not try to clean the inverter with 
a damp cloth.   
Doing so could result in electric shock.   
 
 
Mandatory 
▼ 
Use this option under the environment specified in the instruction manual. 
Usage under the environment other than them may cause damages or malfunctions or 
an accident. 
▼ 
Use an additional safety device with your VF-AS1/PS1 or system to prevent a serious 
accident due to the unit malfunctions. 
Usage without an additional safety device may cause an accident. 
 
■ 
Disposal
   
  Caution
 
 
 
 
Mandatory 
▼ 
For safety's sake, do not dispose of the disused inverter yourself but ask an industrial 
waste disposal agent (*).   
If the collection, transport and disposal of industrial waste is done by someone who is 
not licensed for that job, it is a punishable violation of the law. (Laws in regard to 
cleaning and processing of waste materials) 
(*) Persons who specialize in the processing of waste and known as “industrial waste 
product collectors and transporters” or “industrial waste disposal persons.”   
 
 
■ 
Notes on use 
Notes
 
 
 
▼ 
Do not install the inverter where the temperature or the humidity will change rapidly.   
▼ 
Keep a distance of 20cm or more between the inverter's power cable and the data 
transmission cable.   
Or the inverter might malfunction because of noise.   
▼ 
Insert a magnetic contactor or similar device between the VF-AS1/PS1 and the power 
supply to ensure that power is turned off if an emergency stop command is entered 
through the network.