Vanguard Managed Solutions 6455 Manual De Usuario
3-26
Installation and Replacement
Modifying Your Vanguard 6435/6455
Figure 3-13. FLASH/Data Compression/Encryption SIMM Installation
Encryption or
Tab
Metal Clip
Locking Tab
FLASH SIMM
To Install the Data Compression or
Encryption SIMM:
Encryption SIMM:
Push the SIMM into the connector, lining
up the holes with the tab, allowing the metal
clips to hold the SIMM in place.
up the holes with the tab, allowing the metal
clips to hold the SIMM in place.
To Remove the Data Compression or
Encryption SIMM:
Encryption SIMM:
Use your fingers to push back the two metal
retaining clips and lift out the SIMM.
retaining clips and lift out the SIMM.
To Install the FLASH SIMM:
Insert the SIMM into the connector at a
slight angle, then straighten it and push the
locking tabs through the holes.You will hear
the clips click into place.
slight angle, then straighten it and push the
locking tabs through the holes.You will hear
the clips click into place.
To Remove the FLASH SIMM:
Use your fingers to push back the two metal
retaining clips and lift out the SIMM.
retaining clips and lift out the SIMM.
Data Compression
SIMM