Viewsonic VS13789 Manual De Usuario

 

ViewSonic  WPD-100 

40 

2: SPAIN 
3: FRANCE 
4: MKK 
5: MKKI (TELEC) 
6: ISERAL (Channel 3 to 9) 
7: ISERAL (Channel 5 to 13) 
 
Please note that only change the country code if you 
are in different country. For example: when 
operating this product in US, only channels 1~11 can 
be operated. Selection of other channels is not 
permitted under FCC regulations. 

No forwarding 
among wireless 
clients 

Check this box and wireless clients will not be able to 
share data with each other. 

Hide SSID 

Check this box and the SSID will not be broadcasted to 
the public. Your wireless clients must know the exact 
SSID to be able to connect to your computer. This option 
is useful to enhance security level. 

Allow BW 40 MHz  Check this box to allow BW 40MHz capability. 
Beacon(ms) 

You can define the time interval that a beacon signal 
should be send. Default value is 100. Do not modify this 
value unless you know what will be affected. 

TX Power 

You can select the wireless output power here. Please 
select a proper output power setting according to your 
actual needs. You may not need 100% of output power if 
other wireless clients are not far from you. 

Idle Time 

Select the idle time for the wireless access point. Default 
value is 300. Do not modify this value unless you know 
what will be affected. 

 
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all 
values to factory default value.