OKI 3100e Manual De Usuario
English
Chapter 3 - Network Setup
11
Installing as LPR printer
1.
Open the [Control Panel] and double-click on
[Network and Dial-up connections].
[Network and Dial-up connections].
2.
Double-click on [Local Area Connection] and
click on [Properties].
click on [Properties].
3.
Select [Internet Protocol (TCP/IP)] on [Local
Area Connection Properties] screen and click on
[Properties].
Area Connection Properties] screen and click on
[Properties].
4.
Enter [IP address], [Subnet mask], [Default
gateway] and [DNS server address], then click on
[OK].
gateway] and [DNS server address], then click on
[OK].
Note:
For the IP address setup when DHCP Server
is used, please refer to “IP address setting in
DHCP server environment” on page 29.
is used, please refer to “IP address setting in
DHCP server environment” on page 29.
5.
Close [Local Area Connection] screen.
6.
Double-click on [Printers], then double-click on
[Add Printer].
[Add Printer].
7.
[Add Printer Wizard] is displayed. For printer
management, select [Local printer] and click on
[Next>].
management, select [Local printer] and click on
[Next>].
8.
On the port selection screen, select [Create a new
port:] and [Standard TCP/IP Port], then click on
[Next>].
port:] and [Standard TCP/IP Port], then click on
[Next>].
9.
On [Add Standard TCP/IP Printer Port Wizard]
screen, select [Okidata Network Printer] in
[Standard] printer as [Device Type], then click on
[Next>].
screen, select [Okidata Network Printer] in
[Standard] printer as [Device Type], then click on
[Next>].
10. On [Add Printer Wizard] screen, click on [Have
Disk...].
11. Insert the printer driver CD-ROM into the CD
drive and click on [OK].
12. Follow the on-screen instructions and install the
printer driver.
Note:
By default, Windows will install the English
printer driver. To install a localised printer
d r i v e r i n y o u r l a n g u a g e , b r o w s e t o
D:\DRIVERS\WIN2000\Language on the
CD-ROM and run setup.exe from that
directory (where D:\ is the drive letter of
your CD-ROM drive; Language is your
language).
printer driver. To install a localised printer
d r i v e r i n y o u r l a n g u a g e , b r o w s e t o
D:\DRIVERS\WIN2000\Language on the
CD-ROM and run setup.exe from that
directory (where D:\ is the drive letter of
your CD-ROM drive; Language is your
language).
13. When the printer driver is installed, right-click on
the installed printer and select [Properties].
14. Click on [Print Test Page] button and the setup is
complete when the test pages are printed.
3100euGB.book Page 11 Friday, March 16, 2001 1:18 PM