OKI 3100e Manual De Usuario

OkiLAN 3100e Network Card

Printer settings

For the basic use of the printer’s operator panel, please
refer to the user’s guide for the printer.

Please wait for a minimum of 30 seconds before turning
the power off to the printer. It will take about 30
seconds for the printer to save a menu change after you
exit the menu.

If you wish to cancel the menu change, you can exit the
menu mode by pressing the ON-LINE button.

We recommend that you confirm the contents with
menu print after you make a change in the menu.

Note:

You can only carry out a network setting of
t h e pr i nt e r w h e n t h e p r in t er i s N O T
receiving any print data.

Network enable/disable

In order to connect this network card to network and
use it, Network must be set to ENABLE on the printer’s
operator panel. The default setting for NETWORK in
the printer menu is ENABLE* (* indicates that value is
set).

Confirm that the printer is in the idle state from
the LCD panel and the indicator.

Note:

Do not set NETWORK to DISABLE* whilst
print data is being received by the printer.

Press ON-LINE button to set the printer to OFF-
L I N E a n d p r e s s M E N U 1 b u t t o n . W h e n
PERSONALITY is displayed, press MENU1
button repeatedly to display HOST/IF.

Press ENTER button. PARALL is displayed.
Press MENU1 button, to display NETWORK.

When you see that the bottom column of the LCD
is ENABLE*, press ON-LINE button to end the
menu setting.

When you see that the bottom column of the LCD
is DISABLE*, press left arrow button or right
arrow button until ENABLE is displayed in the
LCD bottom column. Then press ENTER button
to have the ENABLE* displayed. Then press ON-
LINE button to end the menu setting.

If you do not wish to receive print data from the
network, set NETWORK to DISABLE* in the
above procedure.

3100euGB.book Page 58 Friday, March 16, 2001 1:18 PM