Nortel Networks 1010 Manual De Usuario
48
Appendix A Technical specifications
NN46110-313 02.01
•
6.05.140 and all subsequent versions
•
7.00.062
•
7.05.100 and all subsequent versions (FIPS branch)
•
7.05.300 and all subsequent versions
The following figures show the full and half-height Ethernet faceplates for the
VPN Router 1100.
VPN Router 1100.
Figure 18
VPN Router 1100 full-height 1000BASE-T (1000 GT)
The full-height model is for installation in slot 2; the half-height model is for
installation in slot 3.
installation in slot 3.
Figure 19
VPN Router 1100 half-height 1000BASE-T (1000 GT)
Select cables for this card as follows. Keep in mind that this card is
auto-negotiating and uses the highest possible data rate:
auto-negotiating and uses the highest possible data rate:
•
For 100BASE-TX operation, use Category 5 twisted-pair wiring: one pair
each for transmit and receive operations. The cable must comply with the
each for transmit and receive operations. The cable must comply with the
EIA 568 wiring specification. Nortel recommends a maximum length of 100
meters for the cable segment.
meters for the cable segment.
•
For 10BASE-T operation, use Category 3, 4, or 5 twisted-pair wiring.