Cisco 7603 and Catalyst WS-C6503 chassis 1400W AC power supply PWR-1400-AC= Manual De Usuario

12.2(33)SRC

To configure WS-X6708-10GE port oversubscription, refer to the hw-module oversubscription command in the
command reference at this URL:

Installation of a WS-X6708-10GE switching module in a chassis other than the following prevents operation at levels
that are fully NEBS-compliant:

 with dual fan tray

 with dual fan tray

WS-X6708-10G-3C and WS-X6708-10G-3CXL are the orderable product IDs.

The front panel is labeled WS-X6708-10GE.

Cisco IOS software commands display WS-X6708-10GE with either WS-F6700-DFC3C or WS-F6700-DFC3CXL.

WS-X6708-10GE ports do not support

VACL capture

. (CSCsb59015)

WS-X6708-10GE is not supported in the

WS-C6503

 and

CISCO7603

 chassis.

In a

, WS-X6708-10GE is supported only in slots 9 through 13 and does not power up in other slots.

On WS-X6708-10GE ports, STP BPDUs are not exempt from

suppression. Do not configure Traffic

Storm Control on STP-protected WS-X6708-10GE ports that interconnect network devices.

Product ID
(append “=” for spares)

10GBASE dense wavelength division multiplexing (DWDM) 100-GHz ITU grid 12.2(33)SRA

10GBASE receive-only wavelength division multiplexing (WDM)

12.2(33)SRA

10GBASE for CX4 cable

12.2(33)SRA

10GBASE-SR Serial 850-nm short-reach multimode fiber (MMF)

12.2(33)SRA

10GBASE-LX4 Serial 1310-nm multimode fiber (MMF)

12.2(33)SRA

10GBASE-ER Serial 1550-nm extended-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF)

12.2(33)SRA

Product ID
(append “=” for spares)