Nortel Networks 4050 Manual De Usuario
Chapter 10 Configuring system settings 497
Nortel Secure Network Access Switch 4050 User Guide
2
Enter the Management IP Address (MIP) information in the applicable fields.
describes the Management IP Address fields.
3
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Configuring a Nortel SNAS 4050 host using the SREM
To configure a Nortel SNAS 4050 host, complete one or more of the following
procedures:
procedures:
•
•
•
For details about configuring host interfaces, see
. For details about configuring host and interface
ports using the SREM, see
,
and
.
Table 95
System Configuration fields
Field
Description
Management IP Address
Sets the MIP for the cluster. The MIP identifies the cluster
and must be unique on the network. For more information,
see
and must be unique on the network. For more information,
see
.
Note: Nortel does not recommend reconfiguring this
parameter if you are logged on to the MIP, because you
may lose connectivity. To reset the MIP, log on to the RIP
instead.
parameter if you are logged on to the MIP, because you
may lose connectivity. To reset the MIP, log on to the RIP
instead.