Nortel Networks 4050 Manual De Usuario
536 Chapter 10 Configuring system settings
320818-A
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Reordering a new syslog server
To reorder the existing syslog servers, perform the following steps:
1
Select the System > Servers > Syslog Servers tab.
The Syslog Servers table appears (see
).
2
Select the syslog server entry you want to reorder from the Syslog Server
Table.
Table.
3
Use the arrow up and arrow down buttons to move the syslog server entry to
the correct position.
the correct position.
4
Click Apply on the toolbar to automatically reindex all syslog server entries.
Click Commit on the toolbar to save the changes permanently.
Click Commit on the toolbar to save the changes permanently.
Removing an existing syslog server
To remove an existing syslog server entry from the Syslog Server Table, perform
the following steps:
the following steps:
1
Select the System > Servers > Syslog Servers tab.
The Syslog Servers table appears (see
).
2
Select the syslog server entry to delete from the Syslog Server Table.
3
Click Delete.
A confirmation dialog box appears.
4
Click Yes.
The syslog server entry is immediately removed from the Syslog Server
Table.
Table.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.