Nortel Networks 4050 Manual De Usuario

60 Chapter 2 Initial setup

320818-A

 

The action to be performed when the TunnelGuard check fails depends on 
your selection in 

The quick setup wizard creates the following basic Nortel SNAS 4050 settings:

A Nortel SNAS 4050 domain (Domain 1). A Nortel SNAS 4050 domain 
encompasses all switches, authentication servers, and remediation servers 
associated with that Nortel SNAS 4050.

A virtual SSL server. A portal IP address, or pVIP, is assigned to the virtual 
SSL server. Clients connect to the pVIP in order to access the portal.

A test certificate has been installed and mapped to the Nortel SNAS 4050 
portal.

The authentication method is set to Local database.

One test user is configured. You were prompted to set a user name and 
password during the quick setup wizard (in this example, user name and 
password are both set to 

tg

). The test user belongs to a group called 

tunnelguard. There are two profiles within the group: 

tg_passed

 and 

tg_failed

. Each profile has a client filter and a linkset associated with it. 

Create default tunnel guard user [no]: yes
Using 'restricted' action for TunnelGuard failure.
User name: tg
User password: tg

Creating client filter 'tg_passed'.
Creating client filter 'tg_failed'.
Creating linkset 'tg_passed'.
Creating linkset 'tg_failed'.
Creating group 'tunnelguard' with secure access.
Creating extended profile, full access when tg_passed

Enter green vlan id [110]: <VID>

Creating extended profile, remediation access when 

tg_failed
Enter yellow vlan id [120]: <VID>

Creating user 'tg' in group 'tunnelguard'.

Initializing system......ok
Setup successful. Relogin to configure.