Nortel Networks 4050 Manual De Usuario
Chapter 13 Viewing system information and performance statistics 665
Nortel Secure Network Access Switch 4050 User Guide
local
Displays the current software version, hardware
platform, up time (since last boot), IP address, and
Ethernet MAC address for the particular Nortel
SNAS 4050 device to which you have connected. If you
have connected to the MIP, the information relates to
the Nortel SNAS 4050 device in the cluster that is
currently in control of the MIP.
platform, up time (since last boot), IP address, and
Ethernet MAC address for the particular Nortel
SNAS 4050 device to which you have connected. If you
have connected to the MIP, the information relates to
the Nortel SNAS 4050 device in the cluster that is
currently in control of the MIP.
ethernet
Displays statistics for the Ethernet network interface
card (NIC) on the particular Nortel SNAS 4050 device
to which you have connected. If you have connected to
the MIP, the information relates to the Nortel
SNAS 4050 device in the cluster that is currently in
control of the MIP.
card (NIC) on the particular Nortel SNAS 4050 device
to which you have connected. If you have connected to
the MIP, the information relates to the Nortel
SNAS 4050 device in the cluster that is currently in
control of the MIP.
•
RX packets: the total number of received packets
•
TX packets: the total number of transmitted packets
•
errors: packets lost due to error
•
dropped: error due to lack of resources
•
overruns: error due to lack of resources
•
frame: error due to malformed packets
•
carrier: error due to lack of carrier
•
collisions: number of packet collisions
•
RX bytes: received packets in bytes
•
TX packets: transmitted packets in bytes
Note: A non-zero collision value may indicate incorrect
configuration of Ethernet auto-negotiation. For more
information, see the
configuration of Ethernet auto-negotiation. For more
information, see the
autoneg
.
ports
Displays the status of the physical ports on the
Ethernet network interface card (NIC) on the particular
Nortel SNAS 4050 device to which you have
connected. If you have connected to the MIP, the
information displayed relates to the Nortel SNAS 4050
device in the cluster that is currently in control of the
MIP.
Ethernet network interface card (NIC) on the particular
Nortel SNAS 4050 device to which you have
connected. If you have connected to the MIP, the
information displayed relates to the Nortel SNAS 4050
device in the cluster that is currently in control of the
MIP.
For each port, information includes link status (up/
down) and the Ethernet auto-negotiation setting (on/
off). If the link is up, the information also includes
current values for speed (10/100/1000) and duplex
mode (half/full). If the link is down and auto-negotiation
is set to off, the information includes the configured
values for speed and duplex mode.
down) and the Ethernet auto-negotiation setting (on/
off). If the link is up, the information also includes
current values for speed (10/100/1000) and duplex
mode (half/full). If the link is down and auto-negotiation
is set to off, the information includes the configured
values for speed and duplex mode.
/info
followed by: