Nortel Networks 4050 Manual De Usuario
Chapter 14 Maintaining and managing the system 729
Nortel Secure Network Access Switch 4050 User Guide
starttrace <tags>
<domain ID> <output
mode>
<domain ID> <output
mode>
Logs information pertaining to a client session.
You are prompted to provide the following information:
•
tags
— specifies the specific features or
subsystems to which you want to limit tracing. The
options are:
options are:
all
— logs all information. The default is all.
aaa
— logs authentication method, user name,
group, and extended profile
dns
— logs failed DNS lookups made during the
session
ssl
— logs information related to the SSL
handshake procedure (for example, the cipher
used)
used)
tg
— logs information related to the TunnelGuard
check (for example, TunnelGuard session status
and the SRS rule check result)
and the SRS rule check result)
snas
— logs operations and events of Nortel
SNA-controlled switches
Enter the desired tag or a comma-separated list of
tags (for example, enter
tags (for example, enter
aaa
or
aaa,dns
). To
trace all features, press Enter to accept the default.
•
domain ID
— specifies the Nortel SNAS 4050
domain to which you want to limit tracing. The
default is all. To trace all domains, enter
default is all. To trace all domains, enter
0
or press
Enter.
Note: With Nortel Secure Network Access Switch
Software Release 1.0, there is only one domain in
the system.
Software Release 1.0, there is only one domain in
the system.
•
output mode
— options are:
interactive
— the information will be logged
directly in the CLI when a client authenticates to the
portal
portal
tftp|ftp|sftp
— the information will be
logged to a file exchange server. You are prompted
to provide the server information.
to provide the server information.
For sample output from the
starttrace
command,
see
.
stoptrace
Stops tracing. If you selected interactive mode for the
starttrace
command and information has been
logged to the CLI, press Enter to redisplay the CLI
prompt.
prompt.
/maint
followed by: