Fuji Bikes FEH381 Manual De Usuario
6-14
2. Main Menu Screen
Touch Switch Adjustment
If a position different from the pressed position turns white on the touch switch test screen, follow the
steps described below to adjust the touch switch position.
steps described below to adjust the touch switch position.
1.
Hold down the [SYSTEM] switch and press the [F2] switch on the touch switch test screen.
2.
Press on “1” that is flashing at the corner on the
touch switch adjustment screen. When the finger
is released, a beep sounds and the position is set.
“2” flashes.
touch switch adjustment screen. When the finger
is released, a beep sounds and the position is set.
“2” flashes.
3.
Press on “2” that is flashing at the corner. When
the finger is released, a beep sounds and the
position is set. “3” flashes.
the finger is released, a beep sounds and the
position is set. “3” flashes.
4.
Press on “3” that is flashing at the corner. When
the finger is released, a beep sounds and the
position is set. “4” flashes.
the finger is released, a beep sounds and the
position is set. “4” flashes.
5.
Press on “4” that is flashing at the corner. When
the finger is released, a beep sounds and the
position is set.
the finger is released, a beep sounds and the
position is set.
6.
To re-set the positions, press the [F2] switch and
follow step 2 and later.
follow step 2 and later.
7.
Press the [F1] switch. A long beep sounds and
the positions are determined. The touch switch
test screen is displayed again.
the positions are determined. The touch switch
test screen is displayed again.
8.
To cancel the setting, press the [F3] switch. The
touch switch test screen is displayed again.
touch switch test screen is displayed again.
Erase
Return
X:
Y:
Touch Switch Adjustment
3
4
1
2
Fix
Reset
Return
X:
Y:
SYSTEM
F2
1
2
1
2
3
4
Fix
Reset
X:
Y:
Touch Switch Adjustment
4
Fix
Reset
X:
Y:
Touch Switch Adjustment
3
4
1
Fix
Reset
Return
X:
Y:
2
Touch Switch Adjustment
3
F1
F2
F3