GE 1019070 Manual De Usuario
3.6 SMTP SECTION
The SMTP page controls the e-mail notification functionality.
3.6.1 SMTP configuration page
The basic SMTP settings are the following:
Parameter Name
Description
SMTP Server
Hostname or IP-address of the SMTP server
Sender name
The MAIL FROM field of the mail message
The RCPT TO field of the mail message
Recipent e-mail address
If the SMTP server requires authentication, the following sections shall also be defined.
Parameter Name
Description
Username for SMTP server authentication
Account
Password for SMTP server authentication
Password
3.6.2 Alarm notification page
This page is used to configure the alarm notification via trap and/or e-mail. Every alarm is listed, and the
user may enable the notification via trap and/or e-mail upon alarm (de)activation.
user may enable the notification via trap and/or e-mail upon alarm (de)activation.
3.7 LOG SECTION
This section offers access to the System and the UPS log. The System log collects information on user
activity, while the UPS log lists UPS alarms. Both the logs can be exported by copying the relevant text
from the page (Highlight button gollowed by CTRL+C).
activity, while the UPS log lists UPS alarms. Both the logs can be exported by copying the relevant text
from the page (Highlight button gollowed by CTRL+C).
3.8 UTILITY SECTION
This section includes some useful tools for troubleshooting and configuration:
• DNS lookup: a tool for verifying DNS server configuration, useful for troubleshooting DNS
problems
• Mii-tool: shows the media technology currently selected / negotiated
• Speed/Duplex: set the media technology to be used / advertised.
• Speed/Duplex: set the media technology to be used / advertised.
As most network devices, SNMP/Web adapters use an auto-negotiation protocol (Auto setting)
to communicate what media technologies they support, and then select the fastest mutually
supported media technology.
Some passive devices, such as single-speed hubs, are unable to auto-negotiate. To handle
such devices, the SNMP/Web adapter can be forced to operate in one of the following modes:
100baseTx-FD, 100baseTx-HD, 10baseT-FD and 10baseT-HD.
to communicate what media technologies they support, and then select the fastest mutually
supported media technology.
Some passive devices, such as single-speed hubs, are unable to auto-negotiate. To handle
such devices, the SNMP/Web adapter can be forced to operate in one of the following modes:
100baseTx-FD, 100baseTx-HD, 10baseT-FD and 10baseT-HD.
• Service: enable / disable the various service interfaces provided over the network
• CA Root Certificate: link to the Certification Authority root certificate for download an installation
• CA Root Certificate: link to the Certification Authority root certificate for download an installation
in the Trusted CA repository on the selected browser. Refer to the Encryption section for details.
Modifications reserved
Page 33/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc
Operating Manual SNMP/Web Adapter