Gateway 860 Manual De Usuario

Upgrading

www.gateway.com

Your NAS delivers superior power and performance. However, some users and 
the applications they use may demand more. This NAS lets you upgrade key 
components when you need increased performance or more storage space. The 
NAS supports Serial ATA hard drives. 

You do not need to turn off the NAS or remove it from the cabinet when 
installing or removing a hot-swap hard drive. 

Identify the defective hard drive by reading the drive LEDs on the front 
panel. A defective drive LED does not light up. For information about the 
location of the drive status indicators, see 

Unlock the control bay cover by inserting the supplied key into the lock 
and turning it counterclockwise until it points to the unlocked icon.

Remove the front bezel by pressing the release latch on both sides of the 
front bezel, then pulling out the bezel. 

Remove the defective hard drive by raising the hard drive carrier handle, 
then sliding the hard drive carrier out of the bay.

Install a new drive into the hard drive carrier. Make sure that the new hard 
drive is the same drive size as the failed hard drive.

Because all hard drives have different cooling power and 
vibration characteristics, specific hard drive types have 
been validated to be compatible with the NAS. For more 
information, contact Gateway Technical Support.

You do not need to turn off the NAS or remove it from the 
cabinet (rack) to install or remove the hard drive. However, 
you need to make sure that no program is accessing the 
hard drive when you remove the drive.