Gianni Industries EASIPROX-ANSI Manual De Usuario
Copyright © Gianni Industries, Inc. All Rights Reserved.
P-MU-EASIPROX Ver. B Published on 2008.02.12 Page: 2/ 4
P-MU-EASIPROX Ver. B Published on 2008.02.12 Page: 2/ 4
III.
The indicator signal chart:
Signal Condition
Yellow
Power
on, Stand-by
Green
Lock relay active
User Signals
Red
Invalid Card
Yellow、
Green
Flashing
The memory is empty
Green
Flashing
Into the ADD CARDS MODE
Red
Flashing
Into the DELETE CARDS MODE
Yellow、
Red
Flashing
Into the CLEAR MEMORY MODE
Yellow
Flashing
Into the TIME ADJUST MODE
Programming
Signals
Green
Blinking
Clearing Memory
IV.
Wiring diagram:
Push Button
(N.O./Com.)
Power Supply
Electric Strike
(Fail-Secure Typical)
Electric magnet
(Fail-safe Typical)
Note:
1. The suggested wire gauge is #22~26 AWG.
2. The varistor or diode must be connected across the lock terminal (electromagnet...)
2. The varistor or diode must be connected across the lock terminal (electromagnet...)
operated by the device. The vartistor controls the overload produced by the strike coil
(EMP).
(EMP).
3. Using a Linear supply power recommended, to prevent power reduction at the card
reader.