Linksys WMA11B Manual De Usuario

13

12

5. On the screen shown in Figure 5-4, choose whether the Adapter will be con-

nected to your wireless or wired network AFTER you have configured it. 

If you will use the Adapter as part of a wireless network, then click the Yes
button for the Wireless network choice. 

If you will use the Adapter as part of a wired network, then click the Yes
button for the Wired network choice.

Click the Next button. 

3. When you see the screen shown in Figure 5-2, make sure the Adapter’s

Wireless or Ethernet LED is flashing. This indicates that the Adapter is
properly connected to either a wireless or wired network. Then click the
Next button to continue.

4. The screen shown in Figure 5-3 displays a list of Wireless-B Media

Adapters on your network, along with the settings information for each
Adapter. (If you have only one Adapter on your network, it will be the only
one displayed.) Select the Adapter you are currently installing by clicking
its name in the Adapters Found box. Then click the Next button.