Linksys WAP200RF Manual De Usuario
34
Chapter 6: Configuring the Wireless-G Access Point
The Administration - Management Tab
The Administration - Management Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
Security Monitor Server
This is a special Syslog server that can record all security monitor events instead of selected events.
Server IP Address. Enter the IP address of the server.
The Administration - Management Tab
On this screen you can configure the password, Web Access, and SNMP settings.
Management
You should change the username/password that controls access to the Access Point’s web-based utility to
prevent unauthorized access.
prevent unauthorized access.
Local AP Password
User name. Modify the administrator user name. The default is admin.
AP password. Modify the administrator password for the Access Point’s web-based utility. The default is admin.
Re-enter to confirm. To confirm the new password, enter it again in this field.
Web Access
To increase the security on accessing the web-based utility, you can enable HTTPS. Once enabled, users need to
use https:// when accessing the web-based utility.
use https:// when accessing the web-based utility.
Web HTTPS Access. The default is Disabled.
Wireless Web Access. Allow or deny wireless clients to access Web based Utility. The default is Disabled.
Figure 6-22: Administration - Management