Linksys WRE54G Manual De Usuario

6

Chapter 3: Getting to Know the Wireless-G Range Expander

The Range Expander's LEDs, where information about network activity is displayed, are located on the front 
panel. In addition, the Range Expander’s antenna is adjustable and located on the front panel. Make sure the 
antenna is positioned straight up into the air, however the Range Expander is positioned.

Blue/Red. The LINK LED lights up when the Range Expander is powered on. This light will 

appear blue when the Range Expander has connected to a functioning access point or 
wireless router. When there is no access point or wireless router with which to connect, this 
light will appear red.

Blue. The ACTIVITY LED lights whenever there is a successful wireless connection and will 
flash when there is wireless network activity.

On the Range Expander's side panel, you will find the Reset and Auto configuration buttons.

The Auto configuration button can be used to easily connect the Range Expander to the 

nearest wireless network, via an access point or wireless router. Simply connect the power 
and press the Auto configuration button. Your wireless network must have WEP disabled 
for this feature to function.

 

Important: Resetting the Range Expander will 

erase all of your settings (WEP Encryption and 

Wireless settings, etc.) and replace them with the 

factory defaults. Do not reset the Range Expander 

if you want to retain these settings.