Linksys PAP2-VU Manual De Usuario

Phone Adapter with 2 Ports for Voice-over-IP

4

The Phone Adapter’s LEDs are located on the front panel.

PHONE 1 LED

Blue. The PHONE 1 LED is solidly lit when a telephone or fax machine has a registered 
connection to your Internet phone service provider through the PHONE 1 port. (The 
connection is registered if your Internet phone service account is active.) It flashes when 
the phone is being used or an incoming call has been detected.

PHONE 2 LED

Blue. The PHONE 2 LED is solidly lit when a telephone or fax machine has a registered 
connection to your Internet phone service provider through the PHONE 2 port. It flashes 
when the phone is being used or an incoming call has been detected.

ETHERNET LED

Blue. The ETHERNET LED lights up when the Phone Adapter is connected to your network 
through the Ethernet port. It flashes when there is data being sent or received.

Power LED

Blue/Red. The Power LED lights up when the Phone Adapter is powered on and ready. It 
flashes when the Phone Adapter is booting up, undergoing a self-test, or performing a 
firmware upgrade. The LED lights up red when the Phone Adapter has failed its self-test or 
is malfunctioning. Refer to “Appendix A: Troubleshooting” for more information.