Linksys FENSK05 Manual De Usuario

If you want to add additional computers to your network
in the future, all you need are more EtherFast 10/100
cards and 100BaseTX cables. Simply plug the new
card(s) into your computer and run a cable from the
card to one of the 5-Port hub's open ports.

For even greater expandability, the 5-Port Hub can be
joined, or uplinked, to other hubs. If you look closely at
the back of the hub, you will see that the port next to
port 1 is marked uplink. Like most hubs, the 5-Port
Hub's port number 1 and uplink port are joined internal-
ly. This means that if you plan on using the uplink port,
you'll need to disconnect any cables that are connected
to port 1.

To uplink the 5-Port hub, simply insert a standard,
100BaseTX cable between the 10/100 Auto-Sensing 5-
Port Workgroup Hub's uplink port and any of another
hub’s 10Mbps or 100Mbps ports. Keep in mind that if
ports 2-5 on the hub are running at 100Mbps, the uplink
port can transmit data up to 100 meters (328 feet) at
100Mbps. If any of the hub’s ports are running at
10Mbps, the uplink port’s distance capability drops to 5
meters (16.4 feet) at 100Mbps.

For more detailed information on Ethernet and Fast
Ethernet distance limitations, see page 54 in the
Appendix of this guide.

Network Planning