Linksys FENSK05 Manual De Usuario
LEDs
LNE100TX EtherFast 10/100 Network Card
LINK
The card has been successfully connected to
a live port on a hub or switch
a live port on a hub or switch
ACT
Denotes the card’s activity. Network packets
are being transmitted or received when this
LED is flickering
are being transmitted or received when this
LED is flickering
100
When ON, the card is operting at 100Mbps
When OFF, the card is operating at 10Mbps
When OFF, the card is operating at 10Mbps
FDX
When ON, the card is operating at a maxi
mum throughput of 200 or 20Mbps;
When OFF, the card is operating in half
duplex at a speed of either 100 or 10Mbps
mum throughput of 200 or 20Mbps;
When OFF, the card is operating in half
duplex at a speed of either 100 or 10Mbps
EFAH05W EtherFast 10/100 Auto-Sensing
5-Port Workgroup Hub
5-Port Workgroup Hub
POWER
Indicates that the hub is receiving power.
100/10COL
Indicates if collisions are being encountered
at 100Mbps and/or 10Mbps.
100
ON if a given port is operating at 100Mbps;
off if the port is running at 10Mbps.
off if the port is running at 10Mbps.
LINK/ACT
ON or flickering if a given port is sending or
receiving data; off if the port is not con-
nected to a node.
nected to a node.
SW
ON if uplink port is in 100Mbps/100 meter
Distance Extender mode. All connections on
the hub must be running at 100Mbps.
Distance Extender mode. All connections on
the hub must be running at 100Mbps.
Appendix
66