Delta Electronics none Manual De Usuario

Chapter 6  Control Modes of Operation|ASDA-AB Series

 

6-18  

 

Revision March 2008, Doc. Name: 2007PDD23000011

The analog voltage between V_REF and GND determines the motor speed command. Using with 

parameter P1-40 (Max. Analog Speed Command) can adjust the speed control ramp and its range.  

5

10

-5

-10

3000rpm

5000rpm

-3000rpm

-5000rpm

Analog Input Voltage (V)

The speed control ramp is

determined by parameter P1-40

 

 

Relevant parameters: 

P1 - 40▲ 

Default: rated speed 

Related Section: 

Applicable Control Mode: S/T 

Section 6.3.4 

Unit: r/min 

 

Range: 0 ~ 10000 

Settings: 

In Speed mode, this parameter is used to set the speed at the maximum input voltage (10V) of 
the analog speed command.  

In Torque mode, this parameter is used to set the speed at the maximum input voltage (10V) of 
the analog speed limit. 

For example, in speed mode, if P1-40 is set to 3000 and the input voltage is 10V, it indicates that 
the speed command is 3000r/min. If P1-40 is set to 3000, but the input voltage is changed to 5V, 
then the speed command is changed to 1500r/min.  

Speed command / limit = Input voltage x setting/10