Delta Electronics VFD-VE Series Manual De Usuario

Chapter 1 Introduction| 

1-6 

 Revision August 2008, 03VE, SW V2.04

 

1. 

Operating, storing or transporting the AC motor drive outside these conditions may cause 

damage to the AC motor drive. 

2. 

Failure to observe these precautions may void the warranty! 

3. 

Mount the AC motor drive vertically on a flat vertical surface object by screws. Other directions 

are not allowed. 

4. 

The AC motor drive will generate heat during operation. Allow sufficient space around the unit 

for heat dissipation. 

5. 

The heat sink temperature may rise to 90°C when running. The material on which the AC motor 

drive is mounted must be noncombustible and be able to withstand this high temperature. 

6. 

When AC motor drive is installed in a confined space (e.g. cabinet), the surrounding 

temperature must be within -10 ~ 40°C with good ventilation. DO NOT install the AC motor 

drive in a space with bad ventilation. 

7. 

When installing multiple AC more drives in the same cabinet, they should be adjacent in a row 

with enough space in-between. When installing one AC motor drive below another one, use a 

metal separation between the AC motor drives to prevent mutual heating. 

8. 

Prevent fiber particles, scraps of paper, saw dust, metal particles, etc. from adhering to the 

heatsink.