LSI 40909G-S Manual De Usuario

Descargar
Página de 56
Installing the itmpt Sun SPARC Solaris FC Driver
3-7
To clear an entry in the persistent device map, use the
clear-persistent
command, as shown in
:
Figure 3.4
Clearing an Entry
Entry 1 has been deleted from the table, and the table is now empty.
3.1.6 itmpt Device Driver
The LSI Logic/IntraServer itmpt driver is designed to Sun Microsystems
SCSA specifications for device drivers. This driver allows connection of
FC devices to LSI Logic/IntraServer adapter cards on PCI-based
machines.
The following sections describe the procedures to install the driver on
Solaris.
3.2 Installing the itmpt Sun SPARC Solaris FC Driver
The LSI Logic LSI40909G-S uses the itmpt FC driver for Solaris. This
driver is included with your adapter kit.
Note:
If you plan to use an LSI Logic/IntraServer FC adapter for
your
system disk, you must use the installation procedure
as described in
in order to load the device driver during installation.
3.2.1 Existing System Installation
These instructions provide details to install the LSI Logic/IntraServer
itmpt driver to an existing Solaris operating system installation.
Note:
You must be logged on as root to perform the installation.
ok
1 clear-persistent
Entry 1 has been cleared
ok show-persistent
ok