LSI 1600 Manual De Usuario

     MegaRAID Enterprise 1600 Hardware Guide

Continued

High-Density Connector The following applies to the high-density SCSI connector table on the previous page:

•  A hyphen before a signal name indicates that signal is active low

•  The connector pin refers to the conductor position when using 0.025 inch centerline flat

ribbon cable with a high-density connector (AMPLIMITE.050 Series connectors)

•  Eight-bit devices connected to the P-Cable must leave the following signals open: -DB (8), -

DB (9), -DB (10), -DB (11), -DB(12), -DB (13), -DB (14), -DB 15), and -DB (P1)

•  All other signals should be connected as defined

Lines labeled RESERVED should be connected to Ground

in the bus terminator assemblies or in the end devices on the

SCSI cable.

RESERVED lines should be open in the other SCSI

devices, but can be connected to Ground.