Edimax Technology LAN USB Adapter Manual De Usuario
- 41 -
Here are descriptions of every setup items:
WMM Enable
Check this box to enable WMM function. Please click ‘Apply’ button on the right of
this check box after you check or uncheck this box, so corresponding settings in
this window will be activated or deactivated respectively.
WMM - Power
Enable WMM power saving mode to save energy
Save Enable
and lets your battery live longer.
Setting...
Click this button to select the WMM data type which will suppress the function of
power saving. When this kind of data is transferring, power saving function will be
disabled. Available data types are AC_BK (Background / Low Priority), AC_BE
(Best Effort), AC_VI (Video First), and AC_VO (Voice First).
Direct Link
Enable or disable direct link setup (DLS) function.
Setup Enable
This function will greatly improve the data transfer rate between WMM-enabled
wireless devices. Please click ‘Apply’ button on the right of this check box after you
check or uncheck this box, so corresponding settings in this window will be
activated or deactivated respectively.
MAC Address
Input the MAC address of another WMM-enabled
wireless device you wish to establish a direct link here, then click ‘Apply’ to add this
MAC address to DLS address table.
Timeout Value
Input the timeout value of this WMM-enabled direct
link wireless device. If the wireless
device is not responding after this time, it will be removed from DLS table.
Tear Down
If you want to remove a specific wireless device from DLS table, select the device
and click this button to remove it.
After you finish the settings, click ‘OK’ to close configuration utility.