Enterasys Networks Wireless Ethernet Adapter I Manual De Usuario
Ethernet Adapter LED Indicators
3-4 Installation
9)
Connect the six-pin DC power cable to the power supply.
10)
Connect the AC power cord to the other side of the power supply.
11)
Connect the round power plug to the Ethernet Adapter port labeled 5V DC.
12)
Insert the AC power cord into the AC socket.
13)
Verify the Ethernet Link LED is illuminated (
), indicating a valid
Ethernet connection to your PC.
14)
The RoamAbout Ethernet Adapter hardware is now ready for configuration
using the RoamAbout Ethernet Adapter Manager. Proceed to
using the RoamAbout Ethernet Adapter Manager. Proceed to
install the Ethernet Adapter Manager.
Ethernet Adapter LED Indicators
As shown in
, there are five LED indicators:
Table 3-1: LEDs
LED
Description
Power. Lights green when power is applied.
Status. Lights amber when status information is available.
Radio Associated / Radio Activity. Lights green when the radio is
associated to another radio and lights amber during radio
communication.
associated to another radio and lights amber during radio
communication.
LAN Link / LAN Activity. Lights green to show that a valid
Ethernet link is present on the 10BaseT port. Lights amber during
Ethernet activity.
Ethernet link is present on the 10BaseT port. Lights amber during
Ethernet activity.
Serial Transmit/Serial Receive. Lights amber when transmitting
data out the serial port and lights green when receiving data on the
serial port.
data out the serial port and lights green when receiving data on the
serial port.