Enterasys Networks Wireless Ethernet Adapter I Manual De Usuario
PC Card Configuration
4-14 Ethernet Adapter Manager Installation
Advanced Tab Page
The Advanced configuration, shown in
, is specific to the feature set of your
wireless LAN card. Consult your PC card documentation for appropriate settings.
Figure 4-5: Radio - Advanced Tab Page
1)
Select the MAC Address option. There are three options:
Detect - detects the first packet received on the wired side, not the radio side.
This feature sets the MAC address used by the wireless LAN interface. Check
to ensure that the unit is set to DETECT. Enterasys Networks recommends to
set this option to DETECT, unless you are performing an advanced
configuration.
This feature sets the MAC address used by the wireless LAN interface. Check
to ensure that the unit is set to DETECT. Enterasys Networks recommends to
set this option to DETECT, unless you are performing an advanced
configuration.
Built-in - Uses the radio MAC Address.
Manual - you enter a MAC Address.
2)
Select the AP Density.