Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Enterasys Networks
  4. Wireless Ethernet Adapter I
  5. Manual De Usuario

Enterasys Networks Wireless Ethernet Adapter I Manual De Usuario

Descargar
Página de 88
Network Configuration
4-18  Ethernet Adapter Manager Installation
Network Configuration
This section describes the network settings necessary to communicate with the Ethernet 
Adapter. 
Communicating directly with the Ethernet Adapter provides:
•
the ability to use the serial port applications.
•
the ability to ping the Ethernet Adapter.
•
the ability to remotely configure the Ethernet Adapter via the telnet protocol.
To configure the network settings, perform the following:
1)
Ensure that you complete the PC card configuration described in the 
 section on page 
2)
Click on the Network Tab. 
3)
Click on the Basic tab. The Network Basic tab page is shown in 
.
4)
Enter the IP address that you want assigned to the Ethernet Adapter. The IP 
address is the network address that will be used by other computers to 
communicate with the Ethernet Adapter.
5)
Enter the Netmask. This is a value that defines the range of IP addresses 
available within your local network.