Manualsbrain.com
  1. Manuales
  2. Marcas
  3. RAD Data comm
  4. RIC-155
  5. Manual De Usuario

RAD Data comm RIC-155 Manual De Usuario

Descargar
Página de 90
RIC-155 Installation and Operation Manual 
Chapter 4  Configuration 
 
Configuring the Internal Bridge 
4-13 
RIC-155 
Bridge Configuration 
Aging Time (sec) 
  (314) 
Bridging Mode    
  (Filter) 
Statistics Counted 
  (OK only) 
Multicast and Broadcast Rate Limit 
> (8 Mbps) 
Bridge Ports   
> 
 
 
Please select item <1 to 5> 
 
ESC-prev.menu; !-main menu; &-exit 
Figure 4-14.  Bridge Configuration Menu 
Configuring the Bridge Ports 
The RIC-155 internal bridge includes four ports: Ethernet management, Ethernet 
data, POS (STM-1/OC-3c link) and host. The bridge ports can be used for isolating 
management traffic from data traffic, serving as an important security tool. 
Appendix B 
details the RIC-155 traffic separation mechanism.  
 
To access the Bridge Port menu: 
•  Follow the path: Configuration > Bridge Configuration > Bridge Ports. 
The Bridge Ports menu is displayed. 
RIC-155 
Bridge Ports 
1. DATA Port   
> 
2. MNG Port 
 
> 
3. POS Port Egress 
> (Unmodified) 
 
Please select item <1 to 3> 
 
 
 
ESC-prev.menu; !-main menu; &-exit 
Figure 4-15.  Bridge Ports Menu 
Configuring Ethernet Management and Data Bridge Ports 
The Ethernet management and data bridge ports support VLAN tagging and VLAN 
prioritization. In addition, these ports can be configured to strip VLAN tags at 
egress or leave the frames unmodified. 
 
To configure the Ethernet management and data bridge ports: 
1.  From the Bridge Ports menu, select DATA Port or MNG Port. 
The DATA Port or MNG Port menu appears. 
2.  From the DATA Port or MNG Port menu, configure the following: 
 
PVID
 (ID of the VLAN assigned to the current port): 1–4094. 
 
PVID Priority 
(priority of the assigned VLAN): 0–7