Quantum Audio PX502 Manual De Usuario

 PX502 Tape Library Quick Start Guide

4

Table 2   Rack Hole Types

Square rack holes are the most 
common type of rack holes. They 
can accept either cage nuts which 
mount from the back of the rail or 
clip nuts which clip on from the 
side of the rack rail.

Through holes require clip nuts to 
accept mounting hardware.

Threaded holes require neither 
cage or clip nuts to accept 
mounting hardware.

N

OTE

: The rails within the rack have a hole pattern that 

repeats throughout the rail. 

X

 marks the screw 

positions. Install nut clips (included in the 
accessory kit) on the rails if necessary.

Figure 3  Rail Hole Pattern

0

Installing the PX502 tape library consists of the following 
steps

:

•

•

•

W

ARNING

: If the rack is empty at the time of installation, 

do NOT install the PX502 tape library too 
high in the rack. The weight of the library 
may cause the rack to become “top heavy” 
and unstable if installed in the top of an 
empty rack. Begin installing the PX502 tape 
library from the bottom of the rack if more 
than one library is installed.

N

OTE

: If this is an upgrade to an existing library system, 

see “Multiple Library Stacks” on page 15.