Promise Technology 150TX2 Manual De Usuario

Chapter 4: Installing Software Drivers 

 

 

41 

After installing the FastTrak S150 TX2plus card and rebooting your system, 
Windows XP setup will show a “Found New Hardware” dialog box. Under 
Windows XP, “Mass Storage Controller” will be displayed. 

1.  Insert the FastTrak TX2plus driver diskette into the A:\ drive. 

2. Choose 

Install the software automatically and press the Enter key. 

3. Choose 

WinXP Promise FastTrak TX4000/S150 TX Series Controller from 

the list that appears on screen, and then press the Enter key. 

4.  If using a driver that has not been digitally signed by Microsoft, you will be 

asked if you want to continue the installation. Click Continue anyway. 

5.  When the New Hardware Wizard has finished installing the FastTrak 

TX2plus software, click Finish. 

1.  Right-click on the My Computer icon and select Manage from the popup 

menu.  

2.  From the left panel, select Device Manager. 

3.  Click the “+” in front of SCSI controllers. “WinXP Promise FastTrak 

TX4000/S150 TX Series Controller” should appear.