Promise Technology 150TX2 Manual De Usuario
FastTrak S150 TX2plus User Manual
48
New Windows 98 Installation
The following section details the installation of the FastTrak TX2plus drivers
while installing Windows 98.
while installing Windows 98.
1. Install the FastTrak S150 TX2plus controller card and configure the hard
drive(s), partition and format your hard drive(s), if necessary.
2. Install Windows 98 normally.
3. After installation, go the Start menu and choose Settings.
4. From the Settings menu, choose Control Panel.
5. In the Control Panel window, double-click the System icon.
6. In the System window, choose the Device Manager tab.
7. In the hierarchical display under Other Device is a listing for PCI RAID
Controller. Select it then click the Properties button.
8. Choose the Driver tab in the Properties window, choose Update Driver then
click Next.
9. Choose Search for a better driver than the one your device is using now
(recommended), then click Next.
10. Choose Specify Location then type A:\WIN98-ME in the text box.
11. Insert the FastTrak TX2plus driver diskette into the A: drive.
12. Click the Next button. A message informing you that “Windows 98 has
found Win98-ME Promise FastTrak TX4000/S150 TX Series Controller”
should appear.
should appear.
13. Click Next, then Finish.
14. When asked if you want to restart your computer, click Yes. Immediately
remove the diskette from drive A:.