Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Promise Technology
  4. C6101SSWP000000-2
  5. Manual De Usuario

Promise Technology C6101SSWP000000-2 Manual De Usuario

Descargar
Página de 18
SuperSwap Manual 
 
 
8
with two matching sets of numbered stickers. Place one sticker on the front of 
the drive housing assembly and the matching numbered sticker on the front of 
the drive carrier. 
 
 
 
Figure 2-3: Drive Carrier Assembly 
 
LED Messages 
This section provides information on how to interpret LED display codes as 
reported by the SuperSwap
3
 when connected to the Promise SuperTrak66. 
Two LEDs appear on the front of the SuperSwap housing assembly: 
Power/Drive Status LED (left) and disk activity LED (right). 
Power/Drive Status LED 
Display 
Means 
Green* 
Drive is OK 
Amber (orange) 
Drive is rebuilding and array is in “critical” mode 
Red 
Drive is bad or has failed and is now “offline”; array 
may also have failed depending on RAID level 
Black (dark) 
No drive detected or no power to drive housing 
* Indicates only Power On when SuperSwap is not connected to a 
Promise SuperTrak66 card. 
 
Disk Activity LED 
                                                 
3
 Note: Users must obtain and install Promise FastTrak Driver v.1.30 or later in 
order to implement L ED display functions for the SuperSwap enclosure. Go to 
www.promise.com  to obtain these drivers. 
Drive Carrier
Drive Cable 
Connector
Power
Connector
Access Cover
Pull-Away
Locking Tab
Pivoting Handle