Promise Technology 66 Pro Manual De Usuario

SuperTrak66™ User's Manual 

Chapter 4 

 

- 35 - 

1)   Install the Message Server software on to one (or more) systems on 

the LAN. The system(s) chosen for the Message Server may also 
include a SuperTrak66 station, be an independent station on the LAN, 
or act as a network server for the LAN. All Message Agents connected 
on this LAN will be visible from each instance of the Message Server. 

2)   Install the SuperCheck Monitoring Utility software on to each LAN 

station from which you wish to monitor the SuperTrak66 array(s). 
When you begin SuperCheck, you will need to perform “Adding a New 
Message Server” for each Message Server installed in step 1 that you 
want to monitor. 

1)   If you have not done so already, install a Promise Message Server on 

a system on the LAN. The system chosen for the Promise Message 
Server installation may house a SuperTrak66, be an independent 
station on the LAN, or house a network server for the LAN. For remote 
Internet monitoring, the Message Server component MUST be installed 
on a machine with an unique IP address that is visible to the Internet. 
All Message Agents connected on this LAN will be visible for each 
instance of the Promise Message Server.  

2)   Install the SuperCheck Monitoring utility on to each remote station 

where the SuperTrak system will be monitored. When you begin 
SuperCheck, you will need to “Add a New Message Server” for the 
Promise server installed in Step 1 that you wish to access. 

3)   If the WAN to which the Monitoring utility will be connected has any 

firewall protection measures, you must open the IP address for the 
system (or systems) containing the Promise Message Server software 
in order to connect to them over Internet/WAN. TCP/IP port number 
710 and 711 are used by the Message Agent to accept in-bound 
connections.