Grandstream Networks HandyTone-496 Manual De Usuario
HandyTone-496 User Manual
Grandstream Networks, Inc
.
22
Layer 3 QoS:
48
(Diff-Serv or Precedence value)
Layer 2 QoS: 802.1Q/VLAN Tag
0
802.1p priority value
0
(0-7)
STUN server is :
stun.mycompany.com
(URI or IP:port)
keep-alive interval:
20
(in seconds, default 20 seconds)
Use NAT IP:
(used in SIP/SDP message if specified)
Firmware Upgrade and
Provisioning: Upgrade Via
TFTP
HTTP
Firmware Server Path:
fm.grandstream.com/gs
Config Server Path:
fm.grandstream.com/gs
Firmware File Prefix:
Firmware File Postfix:
Config File Prefix:
Config File Postfix:
Automatic Upgrade:
No
Yes, check for upgrade every
10080
minutes (default 7 days)
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
Firmware Key:
(in Hexadecimal Representation)
FXS Impedance:
600 Ohm
merica)
(North A
Caller ID Scheme:
Bellcore (North America)
Onhook Voltage:
36V
Polarity Reversal:
No
Yes (reverse polarity upon call establishment and termination)
NTP Server:
time.nist.gov
(URI or IP address)
Reply to ICMP on WAN port:
No
Yes (Unit will not respond to PING from WAN side if set to No)
WAN side http access:
No
Yes (WAN side access to http server will be rejected if set to
No)
Syslog Server:
Syslog Level:
NONE
Update
Cancel
Reboot
All Rights Reserved Grandstream Networks, Inc. 2005