Grandstream Networks HandyTone-496 Manual De Usuario

27 

Select the ATA to report the log level. Default is NONE. The level is one of 
DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on 
the following events: 

•  product model/version on boot up (INFO level) 

•  NAT related info (INFO level) 

•  sent or received SIP message (DEBUG level) 

•  SIP message summary (INFO level) 

•  inbound and outbound calls (INFO level) 

•  registration status change (INFO level) 

•  negotiated codec (INFO level) 

•  Ethernet link up (INFO level) 

•  SLIC chip exception (WARNING and ERROR levels) 

•  memory exception (ERROR level) 

The Syslog uses USER facility. In addition to standard Syslog payload, it 
contains the following components: 
  
GS_LOG: [device MAC address][error code] error message 
  
Here is an example: May 19 02:40:38 192.168.1.14 GS_LOG: 
[00:0b:82:00:a1:be][000] Ethernet link is up 

This field contains the URI string or the IP address (and port, if different from 
5060) of the SIP proxy server. e.g., the following are some valid examples:  
sip.my-voip-provider.com, or sip:my-company-sip-server.com, or 
192.168.1.200:5066 

This field contains the URI string or the IP address (and port, if different from 
5060) of the outbound proxy. If there is no outbound proxy, this field 
SHOULD be left blank. If not blank, all outgoing requests will be sent to this 
outbound proxy. 

This field contains the user part of the SIP address for this phone. e.g., if the 
SIP address is: sip:my_user_id@my_provider.com, then the SIP User ID is: 
my_user_id. Please do NOT include the preceding “sip:” scheme or the host 
portion of the SIP address in this field.