Renesas M306V8T-EPB Manual De Usuario

M306V8T-EPB User’s Manual 

3. Usage (How to Use the Emulator Debugger) 

REJ10J0777-0100  Rev.1.00  2005.08.01 

 

Page 50 of 90 

 
 
(2) MAP tab 
 

 

Specifying the emulation memory 
allocation 

Sets the memory area assigned to the emulation memory 
by 4KB. Up to four areas can be set. 
An area set to [INTERNAL] will be allocated to the 
emulation memory. An unchecked area or an unset area 
will be allocated to external area. 
The setting is effective only in the CS3*, CS2*, CS1* 
and CS0*. The maps of SFR, internal ROM and RAM 
are set automatically. 
Be sure to set the OSDRAM area (8000h -- 8FFFh) to 
INTERNAL, and set the OSDROM area (30000h -- 
4FFFFh) to EXTERNAL (default). 

 
 
(3) Flash Clear 

 

Setting to clear the MCU’s internal flash 
ROM 

Specify whether or not you want the MCU’s internal 
flash ROM to be cleared when downloading the user 
program or data. (When cleared, the content of the flash 
ROM is initialized to 0xFF.) The MCU’s internal flash 
ROM is listed in block units. 
-  Any block which has had its check box selected is not 

cleared when downloading. The memory content of 
this block remains intact unless overwritten by 
downloading. 

-  Any block which has had its check box deselected is 

cleared when downloading. 

-  Click the Select All button, and all blocks will be 

selected (marked by a check mark, so that none of the 
blocks is cleared when downloading). 

-  Click the Clear All button, and all blocks will be 

deselected (check marks removed, so that all of them 
are cleared when downloading). 

 
The option you have specified here remains effective the 
next time you start up. 

 

8

8

INTERNAL