Renesas M30620T-CPE Manual De Usuario

( 18 / 52 )

(3) System reset switch

By pressing the system reset switch, you can initialize the emulator system. Table 2.3 shows the
functions of the system reset switch depending on the state of emulator.

Table 2.3 Functions of system reset switch

State of Emulator

Initializes the emulator and waits for commands from the
emulator debugger.

Stops the user's program, initializes the emulator, and
waits for commands from the emulator debugger.

Function

When the user's program is halted

When the user's program is executed

CAUTION

Note on System Reset Switch:

• After pressing the system reset switch, reboot the emulator debugger PD30M.

Otherwise the display of emulator debugger and the actual value (in the emulator)
may not match.

• When the emulator debugger does not start up normally even after rebooting, turn

off the emulator and then turn on again.