ICP DAS USA 8430 Manual De Usuario
I/O configurable via the Ethernet
The DCON Utility is used to configure I-7000, I-8000 and I-87K series I/O modules. It
originally communicated with the I/O modules via the COM port. For I/O modules on the
i-8430,i-8830,i-8KE4 and i-8KE8, using the VxComm technique to create a virtual COM
port can let DCON Utility access the I/O modules via the Ethernet. For more details,
please refer to Chapter 3.
originally communicated with the I/O modules via the COM port. For I/O modules on the
i-8430,i-8830,i-8KE4 and i-8KE8, using the VxComm technique to create a virtual COM
port can let DCON Utility access the I/O modules via the Ethernet. For more details,
please refer to Chapter 3.
Simultaneous access by a maximum of 6 host PCs
Although a maximum of 6 host PCs are allowed simultaneous access, it is
recommended that fewer host PCs are used in order to give better performance and
stability.
recommended that fewer host PCs are used in order to give better performance and
stability.
Internet
Updateable firmware (via the RS-232 port)
Firmware
Note: the 8430/8830/8KE4/8KE8’s COM1 port can be used to download firmware,
update the MiniOS image file, and to configure the IP address.
update the MiniOS image file, and to configure the IP address.
When should the firmware be updated ?
Î Firmware should be updated when ICPDAS announces
8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 7